MMT Fissaggi

Scheda Ancorante TKF

  • Utilizzabile esclusivamente per calcestruzzo non fessurato.
  • Disponibile in acciaio zincato 6 microns.
  • Preassemblati con Dado UNI 5588 e rondella UNI 6592 oppure rondella UNI 9021 (su misure extra lunghe).
  • Assemblati con clip zincata a tre settori per una maggiore tenuta.
  • Le diverse tacche sulla fascetta impediscono lo slittamento durante la fase di espansione.
  • Ideale per fissaggi passanti.
TKF
Descrizione articoli
DescrizioneDiametro
(mm)
Lunghezza
tassello (mm)
Tfix 
(mm)
Tinst
(Nm)
SW
Prof.
foro(mm)
TK 6X45 6 45 1 5 10 55
TK 6X65 6 65 20 5 10 55
TKF 8X50 8 50 1 15 13 55
TKF 8X67 8 67 3 15 13 65
TKF 8X75 8 75 11 15 13 65
TKF 8X90 8 90 26 15 13 65
TKF 8X115 8 115 51 15 13 65
TKF 8X130 8 130 66 15 13 65
TKF 10X60 10 60 1 30 17 70
TKF 10X75 10 75 5 30 17 70
TKF 10X90 10 90 20 30 17 70
TKF 10X120 10 120 50 30 17 70
TKF 10X140 10 140 70 30 17 70
TKF 10X160 10 160 90 30 17 70
TKF 12X75 12 75 1 50 19 95
TKF 12X100 12 100 5 50 19 95
TKF 12X110 12 110 15 50 19 95
TKF 12X120 12 120 25 50 19 95
TKF 12X140 12 140 45 50 19 95
TKF 12X150 12 150 55 50 19 95
TKF 12X160 12 160 65 50 19 95
TKF 12X180 12 180 85 50 19 95
TKF 12X200 12 200 105 50 19 95
TKF 12X220 12 220 125 50 19 95
TKF 12X240 12 240 145 50 19 95
TKF 12X260 12 260 165 50 19 95
TKF 12X280 12 280 185 50 19 95
TKF 12X300 12 300 205 50 19 95
TKF 12X330 12 330 235 50 19 95
TKF 12X360 12 360 265 50 19 95
TKF 16X110 16 110 1 100 24 120
TKF 16X125 16 125 10 100 24 120
TKF 16X145 16 145 30 100 24 120
TKF 16X175 16 175 60 100 24 120
TKF 16X220 16 220 105 100 24 120
TKF 16X260 16 260 145 100 24 120
TKF 16X300 16 300 185 100 24 120
TKF 16X360 16 360 245 100 24 120
TKF 16X400 16 400 285 100 24 120
TK 20X145 20 145 30 100 24 130
TK 20X170 20 170 55 100 24 130
TK 20X220 20 220 105 100 24 130
 
Metodo di installazione
install 11. Use a general drill bit to drill hole for anchor according to the drilling depth and diameter depth and diameter required by the specification model of the anchor bolt installed.
install 12. Before installing, first by hand tightly fasten the anchor bolt nut to the anchor bolt nut to ensur all the components of the anchor bolt have no looseness, then insert the anchor bolt in the drilled hole.
install 13. Tightly screw the nut, adopt torsion wrench to tightly screw according to the tightening moment required by the specification and model of the anchor bolt installed.

Main Menu it-IT

Search